DSC LCD5501Z Manuale Utente Scaricare il pdf (Pagina 1)

Introduction

The LCD5501Z keypad presents system status

using an LCD-style display along with fixed

words and numbers. The keypad can be used

on security systems with up to 32 zones. The

LCD5501Z is compatible with the following DSC

security systems:

• PC580 v2.3 and higher

• PC1555 v2.3 and higher

• PC5008 v2.3 and higher

• PC5010 v2.0 and higher

• PC5015 v2.2 and higher

Specifications

• Connects to control panel via 4-wire Keybus

• One keypad zone input

• Current draw: 45mA (standby)

• Optional tamper version

• Five programmable function keys

• Ready (green), Armed (red) and Trouble (yellow)

status lights

Installation

Unpacking

The LCD5501Z package includes the following

parts:

• One LCD5501Z keypad

• Four mounting screws

• One keypad inner door label

• One set of Fire, Auxiliary and Panic key labels

Mounting

You should mount the keypad where it is acces-

sible to designated points of entry and exit.

Once you have selected a dry and secure

location, perform the following steps to mount

the keypad:

1. Remove the keypad backplate by loosening the

screw located at the base of the unit.

2. Secure the keypad backplate to the wall in the

desired location. Use the screws provided.

3. Before attaching the keypad to its backplate,

complete the keypad wiring as described in the

next section.

Installation Instructions

WARNING: Please refer to the System Installation Manual for information on limitations regarding product

use and function and information on the limitations as to liability of the manufacturer.

LCD5501Z

Version 1.0

WWW.DIYALARMFORUM.COM

1 2 3 4 5 6 7 8

Sommario

Pagina 1 - WWW.DIYALARMFORUM.COM

IntroductionThe LCD5501Z keypad presents system statususing an LCD-style display along with fixedwords and numbers. The keypad can be usedon security

Pagina 2

2Wiring1. Before beginning to wire the unit, ensure thatall power (AC transformer and battery) isdisconnected from the control panel.2. Connect the fo

Pagina 3

3Programming the KeypadThere are several programming options avail-able for the LCD5501Z keypad. These aredescribed below. Record all your programming

Pagina 4

4Alarms Displayed While Armed OptionYou can disable the display of alarms on thekeypad when the system is armed. The displayof alarms is enabled by de

Pagina 5

5Door Chime SoundsYou can program the LCD5501Z keypad tomake different door chime sounds for individualzones, or groups of zones. Each LCD5501Zkeypad

Pagina 6

6[000] Keypad Programming1. Enter [*][8][Installer’s code]2. Enter [000] to go to keypad programming[0] Keypad EnrollmentValid entries are 01-18; e.g.

Pagina 7

7[*] Door Chime Sound Programming1. Enter [*][8][Installer’s code][*]2. Enter 2-digit zone number [01] - [32], then select door chime sound option [1]

Pagina 8